- From www.xuetangx.com
数字集成电路分析与设计(2016春)
Course
zh
Chinese
This content is rated 0 out of 5
- Introductive Level
- Starts on February 21, 2016
Course details
Syllabus
- Hspice
- 1
- 小节
- Introduction and Implementation Strategies for Digital IC
- 1.Introduction to Digital IC
- 2.Architecture of Digital Processor
- 3.Full Custom Design Methodology
- 4.Semicustom Design Methodology
- 5.Quality Metric of Digital IC
- 6.Summary and Textbook Reference
- 7.HW
- 8.PPT
- The Devices
- Key Points Review of Last Lecture
- 1.Introduction
- 2.The Diode
- 3.The MOSFET Transistor
- 4.Secondary Effects
- 5.Summary and Textbook Reference
- 6.HW
- 7.PPT
- The CMOS Inverter I
- Key Points Review of Last Lecture
- 1.Introduction
- 2.Static Behavior
- 3.HW
- 4.PPT
- The CMOS Inverter II
- Key Points Review of Last Lecture
- 1.Dynamic Behavior I
- 2.Dynamic Behavior II
- 3.Power Dissipation
- 4. Summary and Textbook Reference
- 5.HW
- 6.PPT
- Combinational Logic Circuits I
- 1.Introduction
- 2.Static CMOS Design I
- 3.Static CMOS Design II
- 4.HW
- 5.PPT
- Combinational Logic Circuits II
- Key Points Review of Last Lecture
- 1.Static CMOS Design III
- 2.Static CMOS Design IV
- 3.Dynamic CMOS Design
- 4.Summary
- 5.HW
- 6.PPT
- Sequential Logic Circuits I
- 1.Introduction I
- 2.Introduction II
- 3. Static Latches and Registers I
- 4.Static Latches and Registers II
- 5.Static Latches and Registers III
- 6.HW
- 7.PPT
- Sequential Logic Circuits II
- 1.Key Points Review
- 2.Dynamic Latches and Registers I
- 3.Dynamic Latches and Registers II
- 4.Dynamic Latches and Registers III
- 5.Pulse Register
- 6.Pipelining
- 7.Schmitt Trigger
- 8.Summary and Textbook Reference
- 9.HW
- 10.PPT
- Designing Arithmetic Building Blocks I
- 1. Introduction
- 2. Adder: Full Adder (Definition)
- 3. Adder: Circuit Design
- 4. Adder: Logic Design I
- 5. Adder: Logic Design II
- 6. Adder: Summary
- 7.HW
- 8.PPT
- Designing Arithmetic Building Blocks II
- 1. Key Points Review
- 2. Multiplier
- 3. Shifter
- 4. Summary and Textbook Reference
- 5. HW
- 6. PPT
- The Wire
- 1. Introduction
- 2. Capacitance
- 3. Resistance
- 4. Electrical Wire Models
- 5. Summary and Textbook Reference
- 6. HW
- 7. PPT
- Coping with Interconnect
- 1. Introduction
- 2. Capacitive Parasitics
- 3. Capacitive Parasitics II
- 4. Resistive Parasitics
- 5. Summary and Textbook Reference
- 6. HW
- 7. PPT
- Assignment Solving
- 1. Assignment Solving
- 2. The teaching assistants want to say
- Final Exam
- Final Exam
Prerequisite
None.
Instructors
- 刘雷波
Platform
Founded by Tsinghua University in October 2013, XuetangX is the world’s first Chinese MOOC platform and serves as the research and application platform for the Ministry of Education (MOE) Research Center for Online Education. XuetangX has been awarded as one of the national first batch of demonstration base projects for innovation and entrepreneurship. Besides, XuetangX also works with the International Center for Engineering Education (ICEE) under the auspices of UNESCO and supports its online portion. By the end of June 2018, with a total of 25 million enrollments and more than 1,500 online courses from 13 disciplined fields, XuetangX has accumulated over 12 million registered users, covering 209 countries and regions.
This content is rated 4.5 out of 5
(no review)This content is rated 4.5 out of 5
(no review)Complete this resource to write a review